Sheet Goods

Protection Tape
Blue Low-Tack Tape: 2mm thickness - 1 to 3 oz/in Tack- Low Density Polyethylene
Clear Medium-Tack Tape: 4mm thickness - 4 to 8 oz/in Tack- Low Density Polyethylene

High-density Ultra-Suede which is an excellent silencer material.

Ideal for precision cutting of a variety of materials such as cutting cork, UltraSuede, Telfon sheets and great for when you need a fresh, sharp edge for a tough to cut material.

Each snap-off blade provides 12 sharp cutting points.

Carbon steel blade with safety lock ensures the blade stays covered or exposed during handing or use.

This high-tech foam has open-cell construction and smooth surface texture for easy gluing. This medium soft foam can be sanded with fine sandpaper but wears and rebounds well in a wide range of temperatures. Great for applications where vibration and an impact noise are a problem.

This Feeler Gauge Assortment for your padding work. Included are 2 light weight handles with O-rings and thicknesses of feelr material:

Silver: 0.0005"

Amber 0.001"

Red 0.002”

Green 0.003”

TechCork - Assortments (13 Thicknesses)

Full (125mm x 100mm) 

Half Sheet assortments (125mm x 50mm)

TeckCork in 13 thicknesses.

.3mm through 1.0mm in .1mm increments, 1.2mm,1.5mm, 1.8mm, 2.0mm, 2.5mm.

Sorbothane is a non-porous, synthetic material that is used to reduce and absorb vibrations. Convenient and easy to apply, this unique silencing material will prevent the "bounce" commonly experienced when a key foot hits the body of a saxophone.