Repair & Finishing

Introducing the GirthQuake!! This unique dent rod will allow any tech to remove dents on large and small instruments without major flex in the dent rod. This allows for the best dent work results!! Learn More

Our Clarinet Tone Hole Surfacing Tool is a must have for any high end clarinet repair padding project. You will not be disappointed with your results! Learn More

This is the perfect material and size for hand ragging areas where a polishing, cleaning or buffing wheel can not reach. Learn More

Magnets are a great way to locate dent tools when the tooling is in the bore of the instrument! Learn More

Gilding Crayons are available from MusicMedic.com in 7 different colors. Results with Gilding Crayons will vary according to the finish and condition of the instrument with an insignia or serial number to be gilded. For use on wood, hard rubber, and plastic woodwinds, and mouthpieces. Learn More

This remarkable tool is the most versatile dent roller on the market and is nothing short of amazing when considering how many applications it can be used for. It outperforms traditional rollers by giving you access to hard-to-reach places, and saves shop space and money by doing the job of many tools with just one. The Slide-Lock Roller Tool was proudly designed and manufactured in-house at MusicMedic in Wilmington, NC.

Learn More

The sax bell tools are designed to reach dents and dings in the very outer edge and flare of the sax bell- allowing burnishing or rolling right up to the rolled edge- a spot that's really difficult to get with other conventional dent tools. Learn More

Brass Mouthpiece Shank Tool Our Brass Mouthpiece Shank Tool allows you to true up the shank of any size brass mouthpiece easily. This is a traditional tool in the band repair industry and has been used by technicians and band teachers for many years. Normally this tool comes with a T-handle and can be forced into the shank of the mouthpiece, causing damage to the mouthpiece shank by unskilled users. We removed the T from our tool and replaced it with a handy key chain! This keeps unskilled users from shoving the mandrel into the mouthpiece shank and over expanding it. The safest method of restoring your mouthpiece shank to true round is to insert the tool into the shank, and tap with a rawhide mallet to bring it back to round. This method will prevent damage to the mouthpiece and keep it playing great! Made of stainless steel at our facility in Wilmington, NC USA. Learn More

This Tone Hole Pilot Set contains 20 Delrin pilot discs manufactured at MusicMedic in Wilmington, NC.

Learn More

Each collet contains a notch to lock into the tool so that when you move the neck, the collet will not spin.
A variety of collets in .5mm increments.

Learn More

Ideal for precision cutting of a variety of materials such as cutting cork, UltraSuede, Telfon sheets and great for when you need a fresh, sharp edge for a tough to cut material.

Each snap-off blade provides 12 sharp cutting points.

Carbon steel blade with safety lock ensures the blade stays covered or exposed during handing or use.

Learn More

Beautiful, sleek, stainless steel. We created these in the Sax ProShop and have been using them for years.

Learn More

An deal shape for pushing for rebounding dents out of an alto saxophone body tube.
Machined with smooth radius edges from rust-resistant magnetic stainless steel. Slotted to allow the dent barrel to pass through the neck end of the saxophone without removing the body octave pip or removing the bow.

Learn More

Sized to work in all areas of the body tube, the tenor sax dent barrel is heavy enough to rebound up pushed in posts but shaped to provide great control in working out smaller dents and creases too. Slotted to allow the dent barrel to pass through the neck end of the saxophone without removing the body octave pip or removing the bow. Learn More

Sized to work in larger diameter tubes, This highly polished dent barrel has a more pronounced profile for raising stubborn dents. Great for the bottom end of Tenor and Baritone saxes and saxophone bell sections. Machined with smooth radius edges from rust-resistant magnetic stainless steel.

Learn More