4th of July Made in America Sale

Our large post fitting pliers are a specialized tool for reducing the center hole of a woodwind post to remove play between the post and rod that travels through it. When the hole in a post is too large for the rod that travels through it, even properly fitted keys are noisy and difficult to adjust. Precision adjustments are nearly impossible. Until we designed these pliers, fixing these posts was very difficult. Technicians would need to float solder into the post head, sleeve the post head, oversize the rod or, in the case where it is the last post on a stack, split the end of the screw slot. These procedures are very time consuming or unsightly. Fitting posts with these pliers takes seconds and the resulting job is invisible and long-lasting.

Learn More

The Complete Tone Hole Set now includes:

• Complete set of 6 medium grit files for altos and tenors.
• The large 2 1/2" medium grit baritone sax file.
• 27 pilot set. 20 plus 7 additional Jim Schmidt Pilots
• UltiMax Lubricant, for oiling the files while cutting.
• Wrench driver with handle for hand filing.
• 9" drill driver extension for the bottom stack and bell keys.
• 3" drill driver extension for palm keys, side keys, and top stack.
• 7 mounting screws to save time- one for each file.

Learn More

The Low Profile Rivet Punch is made in the USA at MusicMedic.com. Use for installing resonators on saxophone pads. Constructed of highest quality hardened steel, the unique design splits the rivet close to the pad backing so that the rivet won't protrude beyond the edge of the leather wrapped around the back of the pad.

Purchasing pads without resonators decreases inventory and allows resonators to be sized to tone holes. This tool will work with all metal resonators that use rivets, including Seamless Domed resonators.

Learn More

Stronger and sharper than most blades you will find at local hardware stores, these industrial strength, coated stainless steel razor blades are the industry standard. Learn More

This cutting or punching block is excellent for shop work. It is large enough to be very useful in the shop and is made from the high density plastic that will not dull blades. Use this block to cut corks and felts at the bench or under any hole punches to keep their blades sharp.

4 inches (101 mm) square Learn More

A great screw driver and pad prick set for a the do-it-yourselfer or for a anyone on the go. Perfect for emergencies and quick repairs. Small enough to keep in the accessory compartment of a woodwind case.

-1 steel handle

-4 slotted blades - .055”/.070”/.080”/.100” 

-1 steel awl

Packed in a small plastic tube to keep all the parts secure in your case or on your bench.

Learn More

Keep parts organized when the instrument is disassembled. This block is designed so the longest rods are located at the back to avoid reaching over them. There are labeled holes for the 27 most common rods, and places for 3 miscellaneous rods. There are holes for rollers up to 6mm in diameter which will accommodate most makes and models of saxophones. This rod block can be used for any size of saxophone. Learn More

This Screw Block will hold pivot screws from all makes and models of saxophones. There are also places for guard screws, neck screws, lyre screws as well as holes for miscellaneous screws. Each block has a convenient thru-hole to allow for storage on a nail or hook. The blocks are durable with a surface that is resistant to oils and grease. Learn More

Keep parts organized when the instrument is disassembled. The Clarinet block will hold pivot screws and rods and is separated into Upper Joint and Lower Joint. There are places for the most common rods and screws and a storage area for small parts. Learn More

The Flute block is separated into Body and Foot Joint, and there are places for the most common rods and screws and a storage area for small parts. Rod Pins, or Knock Pins, can easily be stored in the block while the flute is disassembled. Learn More

We use Pad Leveling Rings as the first step to installing a pad in a saxophone. These tools give you a firm base for leveling without creating an impression in the pad by it coming into contact with the tone hole. Learn More

The Flute Post Moving Lever has been redesigned with a light weight aluminum handle for a well-balanced precision tool that feels good in your hands. 

Learn More

Our saxophone body straightening tool was designed at the body work station in our shop. We designed the plugs for this tool to have a gentle taper which will contact the receiver on the body at more than one point. This helps hold the tool securely in the receiver. The center plate has been cut out to reduce the weight of the tool. The radius on the "I" shaped center plate distributes the force of the blow evenly. This allows the technician a little bit of leeway when tapping the horn against the bench. If you miss you still transfer the same amount of force as if you had hit the tool squarely on the bench. The Sax Body Slam tool plugs will fit in most makes of alto and tenor saxophones. If you need a custom-made plug for a larger or smaller tenon please email us. Learn More

If you know anything about mouth piece refacing, you're likely already familiar with Theo Wanne. His mouthpiece refacing kit has what you need to get started on learning to repair and alter mouthpieces. Theo's 16 page full color book has comprehensive illustrations, instructions, and guides, and is the most concise and to-the-point resource on mouthpiece repair and refacing. Learn about the tools in the kit, tip size, facing curves, table flattening, measuring, adjusting tip rails, and forming baffles.

Theo includes several sets of numbers to work with as you learn the basics and start to develop your own ideal mouthpiece measurements. This set comes in a beautiful storage box and contains the 16 page guide, the Digital Mouthpiece Tip Gauge which is the most precise mouthpiece tip measuring tool we have seen, the Feeler Set for measuring table and lay, and a Glass Gauge to measure mouthpiece facings. All you need are a few practice mouthpieces!

Learn More

Château Student Model Alto Saxophone Gold Lacquered. Chateau Model CAS-22GL Learn More