Open Hole Flute Tool

$83.38
Out of stock

This compact 2-in-1 tool will streamline your open hole flute padding.  It tackles two common problems that occur during the padding process: bushings (or grommets) getting spread, and pad cup chimneys getting crushed in. 

This compact 2-in-1 tool will streamline your open hole flute padding.  It tackles two common problems that occur during the padding process: bushings (or grommets) getting spread, and pad cup chimneys getting crushed in.  Once these things are no longer round and true, it makes the process of shimming and padding more difficult and increasingly inconsistent.
The tapered end of the tool on the outside helps you round out and reshape the bushings.
To reshape chimneys, remove the cap of the tool to use as a backing plate.  Insert the taper through the chimney to round it out, with the pad cup back against the backing plate for support.
This tool will also let you set the height of your bushings, so that each time the bushing and pad are removed in order to shim the pad, you can reinstall the bushing at the exact same height each and every time.  Simply thread the stopper in or out until the desired height is reached, and it will only allow you to press the bushing down to that height.
The Open Hole Flute Tool is a unique concept that was proudly designed, tested, and manufactured at MusicMedic in Wilmington, NC, and made from stainless steel and Delrin.