Dent Removal Tools

Why stainless steel?

We chose to make this tool from stainless steel.  We know we’re spending our customers’ money, because that means that the tool price is higher.  Stainless steel costs more to buy and more to machine, and it’s harder to machine. So, why do it?  

We’re creating more and more tools that we hope will last a lifetime, and we think that’s worth a little more cost upfront.  Stainless steel is harder and stronger, and it’s much longer lasting because it isn’t susceptible to corrosion. 

At the Sax ProShop, I didn’t want my customers to see rusty tools in the shop, and I’m sure every other technician and shop owner can relate!  But regular steel tools rust quickly due to chemicals used in the industry, like vaporized flux, and it requires technicians to spend a lot of time polishing tools and coating them with oil, instead of doing what they do best. 

Stainless steel is also great because it’s non-magnetic.  Our tools won’t collect fillings and shavings, and that means you don’t have to worry about damaging brass with metal debris while you’re doing dent work.

Lastly, out of pride, I don't want to have the MusicMedic name on some rusty tool.  I want tools with my company’s name on it to be the best, to shine bright, so we make tools out of stainless even though we must sell them at a lower profit margin.

Thanks for choosing stainless steel and MusicMedic!

Just received my dent rod and oblong slotted dent ball. Never used one before. I thought it through, worked carefully and took my time. Removed a thumbprint size dent that was below the thumb rest on a 1946 Conn 6M. It turned out great. The thumb rest was pushed in a little too. Fixed that also. Wow, it turned out great. 
Thank you!
John McEverett
Set Descending Direction
View as List Grid

Items 1-15 of 36

Page
  1. Mini Rare Earth Magnet

    Starting at $3.00

    Magnets are a great way to locate dent tools when the tooling is in the bore of the instrument! Learn More
  2. Heat-N-Set Low Temperature Moldable Thermoplastic
    $24.50

    Heat-N-Set Low Temperature Moldable Thermoplastic can be easily molded into various shapes from small beads. 

    Use Heat-N-Set as grips and extensions on tools you are using, or use as a form to hold tools in place on your bench.
    Heat-N-Set can be softened with heat and re-shaped again and again! 

    Learn More
  3. Flute Body Mandrel - Alto
    $180.00
    Out of stock
    We developed the Alto Flute Body Mandrel by special request . Next time an alto flute comes into the shop, you'll be glad you have this custom mandrel for checking straightness, dent work, polishing, and burnishing on alto flutes.

    .968" diameter mandrel with 20" working length - 26 1/8"  total length

    Learn More
  4. Tenon Sizing Collets

    Starting at $0.00

    Each collet contains a notch to lock into the tool so that when you move the neck, the collet will not spin.
    A variety of collets in .5mm increments.

    Learn More
  5. Economy Tenon Sizing Tool
    $975.00
    Out of stock

    The Economy Tenon Sizing Tool resulted from customer requests to make a less expensive version of our Tenon Sizing Tool. This version features the same stainless steel construction and CNC craftmanship, but without the added cost and complexity of the adjustable cam system of the original tool. Shrinking is done with a twist of the included oversized handle.

    Collets sold separately here: Tenon Shrinking Collets

    Learn More
  6. Slide-Lock Roller Tool

    Starting at $75.00

    This remarkable tool is the most versatile dent roller on the market and is nothing short of amazing when considering how many applications it can be used for. It outperforms traditional rollers by giving you access to hard-to-reach places, and saves shop space and money by doing the job of many tools with just one. The Slide-Lock Roller Tool was proudly designed and manufactured in-house at MusicMedic in Wilmington, NC.

    Learn More
  7. Saxophone Body Mandrels

    Starting at $239.08

    The MusicMedic.com Stainless Steel Saxophone Body Mandrels will change the way you do dent work. These revolutionary mandrel sections were designed by the Sax ProShop team to give you the right taper, no matter which part of the body tube you're working on.

    Learn More
  8. Flute Body Mandrels

    Starting at $47.50

    Out of stock

    Our Economy Flute Body Mandrel is made from precision ground tool steel. It is very hard to provide a long-lasting work-piece. The rounded end and rounded hip will help prevent damage. The workable space is 15”, or the entire length of a flute body, and 3” is allocated for securing in a vice and indicated by a line. Use the mandrel to check for straightness, burnishing, polishing, and dent removal. The threaded hole on the end will hold accessories, like a flute ragging attachment for easy polishing. Ships in blue protective sleeve.

    Our Professional Flute Body Mandrel features the longest shaft length in the industry, with a full 18” working area. It's made from hardened precision ground tool steel. It features a rounded end tip and a threaded hole on the end to hold accessories, like the flute ragging attachment for easy polishing. Secure the mandrel in a vice with the hex stock end for the most reliable grip that gives you 6” to chuck without damaging any of the workable area. A delrin stopper will keep the flute body from going too deep and hitting the hex stock or vice. Use your Professional Flute Body Mandrel for checking straightness, dent work, polishing, and burnishing.

    Mandrel Diameter is 0.735 inches (18.69mm) with as radius nose threaded for a 1/4-20 SAE fastener.

    Learn More
  9. Mandrel Guard

    Starting at $0.85

    Get protection for your valuable dent tools. This durable plastic mesh stretches to conform to the shape of tapered mandrels and keeps them safe from accidental nicks and scratches. The mesh texture raises the mandrel off of the bench top or drawer bottom to keep dirt and grit off of your tools. Available in three size ranges and sold by the foot in uncut lengths. Learn More
  10. Dent Barrel - No. 7
    $72.76

    Sized to work in larger diameter tubes, This highly polished dent barrel has a more pronounced profile for raising stubborn dents. Great for the bottom end of Tenor and Baritone saxes and saxophone bell sections. Machined with smooth radius edges from rust-resistant magnetic stainless steel.

    Learn More
  11. Open Hole Flute Tool
    $72.50
    Out of stock

    This compact 2-in-1 tool will streamline your open hole flute padding.  It tackles two common problems that occur during the padding process: bushings (or grommets) getting spread, and pad cup chimneys getting crushed in. 

    Learn More
  12. Sax Bell Rim Tools

    Starting at $285.60

    The sax bell tools are designed to reach dents and dings in the very outer edge and flare of the sax bell- allowing burnishing or rolling right up to the rolled edge- a spot that's really difficult to get with other conventional dent tools. Learn More
  13. Collet Box for Sizing Collets
    $32.00
    Out of stock
    Keep all of your Collets for your Tenon Shrinker clean and well organized with this handy acrylic box made at our shop in Wilmington, NC USA. Learn More
  14. Tenor Sax Dent Barrel
    $44.00
    Sized to work in all areas of the body tube, the tenor sax dent barrel is heavy enough to rebound up pushed in posts but shaped to provide great control in working out smaller dents and creases too. Slotted to allow the dent barrel to pass through the neck end of the saxophone without removing the body octave pip or removing the bow. Learn More
  15. Alto Sax Dent Barrel
    $42.00

    An deal shape for pushing for rebounding dents out of an alto saxophone body tube.
    Machined with smooth radius edges from rust-resistant magnetic stainless steel. Slotted to allow the dent barrel to pass through the neck end of the saxophone without removing the body octave pip or removing the bow.

    Learn More
Set Descending Direction
View as List Grid

Items 1-15 of 36

Page