Search results for: 'pin vito'

Tap and Die accessories Learn More

WITCC School Tool Block Learn More

The Flute block is separated into Body and Foot Joint, and there are places for the most common rods and screws and a storage area for small parts. Rod Pins, or Knock Pins, can easily be stored in the block while the flute is disassembled. Learn More

This assortment of 12 tapered broaches contains all the necessary sizes for use on woodwinds. These tools are excellent whenever a non-threaded hole needs to be enlarged or rounded. We use these for enlarging flat spring holes, spring holes in posts and other general purpose work. These broaches are not recommended for use on hinge tubes as they are designed to cut a tapered hole. Assortment covers drill sizes 30-70.

Can be used with any of our pin vises. We highly recommend using these broaches with our Swivel Head Pin Vise because it can hold any of the sizes in this assortment. Learn More

These asbestos-free soldering boards are perfect for protecting your bench when soft soldering or brazing. Pins can be inserted into these boards as needed. These boards will withstand temperatures up to 3000 degrees Fahrenheit (1649 degrees Celsius). All boards are 1/2" (12.7mm) in thickness. Learn More

Have a MKVI or Yamaha with a noisy ball and pin mechanism? You can replace that mechanism with one of these forks. This is a common modification in the Sax ProShop and these are made from solid brass. Two Sizes: 34.25mm 30.25mm

For more photos of the modifications please click here. 

Learn More

Finely ground Grenadilla wood for the repair of wood bodied instruments. 100% wood product for making strong, good looking repairs to cracks, chips and defects. Use with a thin Cyanoacryiate (SuperGlue) adhesive to create a tintable fill to match the areas surrounding the repair. Create seamless repairs to tonehole defects or to conceal the metal pinning that larger cracks may require.

Learn More

The Graver Handle is different from a pin vise handle in that the collet tip rotates with the handle. The position of the collet and handle allow the tool to remain in the fixed position. Though the handle is not useful for drilling purposes, it works great for engraving, deburring, for use with a cutting broach or any process that requires a back and forth motion rather than a full circular drilling type motion. This graver comes with two collets: The small collet ranges from 0 to .030” (0 to .78mm) The Large collet ranges from .066” to .097” (1.68mm to 2.48mm) Handle length including collet: 3” (77mm) Learn More

The Ultimate Woodwind Work Fixture is a revolutionary approach to work fixtures and jigs, with horizontal and vertical orientations, many rotation options, movable locking shuttles, and attachments that will accept every woodwind instrument from piccolo to double reeds to baritone saxophone!

Learn More

Hinge Tube Cutter Set

Our Hinge Tube Shortening and Post Facing Set makes it faster and easier to achieve low friction and maximum surface contact in your key fitting.

Replacement cutters available separately. Looking for parts?

Replacement pilots available separately. Looking for parts?

Learn More