Search results for: 'pivot screws saxophone'

Wilmington Clarinet Service Parts

Pivot screws, Complete hinge rod sets, and Replacement Flat springs with spring screw.

• Pivot screws sold in pairs
• Universal Flat spring sold as singles with mounting screws
• Replacement hinge rods sold as a complete set for one Wilmington Clarinet

Fits all Wilmington Clarinet models

Learn More

This Screw Block will hold pivot screws from all makes and models of saxophones. There are also places for guard screws, neck screws, lyre screws as well as holes for miscellaneous screws. Each block has a convenient thru-hole to allow for storage on a nail or hook. The blocks are durable with a surface that is resistant to oils and grease. Learn More

These levers are designed to adjust the angle between key arms, key feet and compound keys on saxophone. Precise adjustment of the key and arm angles without changing key cup orientation is easy using this tool.

Learn More

Keep parts organized when the instrument is disassembled. The Clarinet block will hold pivot screws and rods and is separated into Upper Joint and Lower Joint. There are places for the most common rods and screws and a storage area for small parts. Learn More

This is the tool block associated with the Sax Proshop class: SAXOPHONE BASICS DONE RIGHT: A 4-DAY INTENSIVE IN-PERSON LEARNING EXPERIENCE

Tools and materials supplied in this kit will be referenced duing the class and examples of common uses will be demonstrated.

• Be sure to check out the list of supplemental items that you might already have around the house (Click HERE)

Select only the tool block items you need - 10% tool block discount shown in cart when you purchase the "Basics Done Right" class. 10% Discount applies to -any items- purchased at the same time as the class but is not applied to the cost of the class.

Learn More

Noisy rollers and clicking pivots are a thing of the past. Ultimax Pivot and Roller Lubricant is an amazing sticky oil that grabs both surfaces and traps in air bubbles, creating a thick, air-packed liquid bearing surface that takes up space in key mechanisms. This liquid bearing surface allows keys to move freely without noise even when there is excessive play in the mechanism. There is nothing better for silencing rollers and key pivots. Learn More

This high quality, custom set of Thread pitch gauges contains all the thread sizes commonly used in band instrument repair. Use this tool to find the thread pitch on any screw.

To use the thread pitch gauge, simply match the threads on any screw or rod to the ridged edge of the corresponding leaf. American Unified threads (UNC, UNF) and metric threads are defined by two dimensions, the thread size and the thread pitch. Unified threads use nominal gauge sizes for the thread diameter and threads-per-inch (TPI) for the thread pitch. For example: A 3-48 thread means the thread is 3 gauge (0.099 inch major diameter) and has 48 threads per inch. Metric threads use the actual major diameter (outside diameter of male threads) in millimeters for the size, and the distance between threads for the pitch. A M2.5x0.45 thread has a major diameter of 2.5mm and a pitch of 0.45mm.

To determine the threads on a rod or screw: First measure the major diameter with a digital caliper and compare it to this table of threads. Male threads are cut with a certain tolerance for how tight they will fit. This means the measured diameter will almost always be slightly smaller than the defined thread size. Every thread size has certain pitches that are commonly used, typically only two or three. Once you have determined the size you will have a narrow list of potential pitches. Use the thread pitch gauge to find which one matches your threads. Special thanks to Jerry Gilbert and Wayne Tanabe for making this chart available.

Screw Pitch Gauge Metric: 0.25-2.5mm threads
Screw Pitch Gauge Standard: 4-84 standard threads

Learn More

These replacement parts were modeled after the Mark VI right hand Thumb Hook. The components will fit vintage Selmer saxophones from early Mark VI through S-80 Series II. Please note the Tear Drop and Screw will not work with Selmer Series III saxophones. In addition, they can be used as replacement parts on other brands of Saxophones that are in the Selmer Style. These will also work with the MusicMedic.com Gold Plated Thumb Hook. Plastic hook not included. Learn More

The Flute block is separated into Body and Foot Joint, and there are places for the most common rods and screws and a storage area for small parts. Rod Pins, or Knock Pins, can easily be stored in the block while the flute is disassembled. Learn More

These are the most comfortable thumb hooks on the market. Our over-size thumb hooks are sleek and adjustable, allowing the player to get the exact angle for their shape of hand and playing position.

Learn More

If you play or repair saxophones, this book is an absolute must read. Ernest Ferron discusses saxophone in detail. This book is divided into three categories: How the saxophone functions Repairs - Adjustment and Harmonization 117 pages total with diagrams. Learn More

The Ultimate Post CounterBore Set will allow you to counter bore posts for most tapered pivot screws in woodwind keys at any angle.

Learn More

Yamaha Saxophone End Plug protects the octave stem from bending and keeps debris out of your saxophone while in its case. Made of durable plastic. Learn More

Gloger Handkraft necks are premium replacement saxophone necks hand made in the netherlands by Karsten Gloger. These amazing necks are custom made at the time of your order.

Learn More

Tan Saxophone Pads - Plastic Domed Resonator - Individual Pads Learn More