Search results for: 'pivot screws'

This digital caliper is perfect for those technicians who need an accurate measuring tool at a low price. This caliper is easy to use and perfect for the accurate measurement of rods, thread diameter, bore size, key heights pad cups, pads, depth of pad cups, pearls, neck tenons and sockets, springs, material thicknesses and any other application where a precision measurement is needed. This caliper is very similar to the MusicMedic.com caliper and differs only in the temper of the jaws, sliding action and the casing around the digital display. An excellent choice for beginning technicians.

Features:

• Lightweight, ergonomic design
• Inch/millimeter conversion reads .0005" or 0.01mm
• Easy access to the single long-life battery
• Last measuring position retained when shut off
• Hardened stainless measuring surfaces for long life
• Fine adjustment thumb wheel
• Lock screw to hold the slide in position
• Resolution: .0005" (0.01mm)
• Zero at any position
• Extra easy-to-read LCD, .44" high characters
• Integrated depth rod

Range: 0-6 Inches (0-150mm)

Approx. Jaw Depth 1 1/2 Inches outside, 5/8 Inch inside (38mm, 15.89mm)

Learn More

This double-sided pin vise is excellent for general repair shop use. The knurled handle and head are designed to be tightened by hand, making it quick to change tools or parts. The handle is hollow and the diameter of the head is nearly the same as the handle, which makes this an excellent pin vise to use when clearance is an issue. The hollow handle allows this pin vise to be chucked into a bench motor, even when working on a longer rod or screw. Because the threads on the handle of this tool and the collet inside are about the same length, it is possible to modify (cut) this collet making it only slightly longer than the head. This modified and very short collet will fit between posts on woodwind instruments. The steel collets will hold most parts that are 2.5mm (.1") in diameter or smaller. Handle length with both heads attached: 4.25” (108mm) Learn More

Our large post fitting pliers are a specialized tool for reducing the center hole of a woodwind post to remove play between the post and rod that travels through it. When the hole in a post is too large for the rod that travels through it, even properly fitted keys are noisy and difficult to adjust. Precision adjustments are nearly impossible. Until we designed these pliers, fixing these posts was very difficult. Technicians would need to float solder into the post head, sleeve the post head, oversize the rod or, in the case where it is the last post on a stack, split the end of the screw slot. These procedures are very time consuming or unsightly. Fitting posts with these pliers takes seconds and the resulting job is invisible and long-lasting.

Learn More

MusicMedic.com Leak Tester Accessories Learn More

Because the Leak Tester is so sensitive, it can be used after the leak light and feeler gauge as a secondary leak tester. It is also an excellent demonstration tool for your customers. Using the Leak Tester, you can quickly test an entire flute before doing leak work, then test it again after the work is complete. It is also possible to use the Leak Tester to test for leaks in individual pads on flute, wooden instrument bodies, brass tubing or any part of any instrument that can be sealed on both ends.

(MusicMedic.com Leak Tester Instructions can be found here)

Learn More

This Tone Hole Pilot Set contains 20 Delrin pilot discs manufactured at MusicMedic in Wilmington, NC.

Learn More

These beautiful pliers are just plain awesome. If you've ever had to remove a spring that has broken off inside or flush with the post before, you're familiar with the risk of moving the post, scratching the post, and generally how challenging it can be to access the broken spring from the desired angle.

Learn More

Beautiful, sleek, stainless steel. We created these in the Sax ProShop and have been using them for years.

Learn More

MusicMedic quality Brass and Soft Jaw Parallel Pliers are available in three sizes. With the added choice of a sturdy Nylon jaw Pliers, there is no reason you can't get a grip without leaving marks! Learn More

These simple pliers are likely to be your first grab when assembling and disassembling. Learn More

Working closely with the manufacturer of this caliper, we set out to offer a precise caliper that you can count on. We designed our Technician's caliper specifically for band instrument technicians, but gave it the accuracy machinists require, and the toughness needed for industrial applications. This caliper's rugged design will stand up to the abuse of any shop. Learn More

This Tenon Sizing Tool resulted from a big dream, and a desire to create a lifetime tool with absolute precision and predictability.  The result is a magnificent stainless-steel masterpiece directly from our shop in Wilmington, NC. Size your flute tenons and soprano, alto, tenor, baritone, and bass saxophone tenons with ease. 

Collets sold separately here: Tenon Shrinking Collets

Learn More