Search results for: 'tone hole file'

These are the smoothest, fastest cutting files you can buy. Nothing compares to diamonds.

The rotary tone hole file set comes with 6 machined discs ranging from 18mm to 50mm in diameter (suitable for Altos & Tenors). The discs can be used to check the flatness of a tone hole by placing a disc (bare metal side down) over a tonehole and using a leak light. To file down high spots of a tone hole, the file is placed on the tonehole and turned with a wrench while applying pressure.

Smaller files can be stacked under larger files to act as a pilot for centering the file on the tonehole.

Learn More

These high quality finishing discs are made of precision surface ground steel with diamonds embedded directly into the metal. Learn More

Jim Schmidt Diamond Abrasive Tone Hole File for Sax – 1 1/4" Fine. Learn More

Jim Schmidt Diamond Abrasive Tone Hole File for Sax - 2" Medium. Learn More

Jim Schmidt Diamond Abrasive Tone Hole File for Sax - 1 1/2" Fine. Learn More

Individual Diamond Tone Hole File Replacement Skins Learn More

The Complete Tone Hole Set now includes:

• Complete set of 6 medium grit files for altos and tenors.
• The large 2 1/2" medium grit baritone sax file.
• 27 pilot set. 20 plus 7 additional Jim Schmidt Pilots
• UltiMax Lubricant, for oiling the files while cutting.
• Wrench driver with handle for hand filing.
• 9" drill driver extension for the bottom stack and bell keys.
• 3" drill driver extension for palm keys, side keys, and top stack.
• 7 mounting screws to save time- one for each file.

Learn More

Jim Schmidt Diamond Abrasive Tone Hole File for Sax. Learn More

Renton Tool Block Learn More

WITCC School Tool Block Learn More

These simple but effective pliers make quick work of repairing or rounding tone holes and pad cups. The unique angle on the front of the plier allows you to get into tight spaces when a pad cup or small tone hole rim is bent down. The flat and round jaws of the plier are buffed smooth to work without marring the pad cup or tone hole of any brass bodied instrument. Length: 5.70in. or 145mm Width of Tip: 10.2mm. Learn More

Beautiful, sleek, stainless steel. We created these in the Sax ProShop and have been using them for years.

Learn More

This hardened steel drill driver is essential when using our technique of filing tone holes with a drill. Drill filing tone holes is the fastest and most accurate method of leveling saxophone tone holes. Learn More

For some, there is no substitute for a good wooden file handle. The smooth and rounded edges of this file fit the hand very well. Press the end of your file in to the hole in the handle of this tool and tap it in place with a mallet. Remove the file and reuse the handle when the file becomes dull.

Length: 4.25 inches or 11.0cm. Learn More

For some, there is no substitute for a good wooden file handle. The smooth and rounded edges of this file fit the hand very well. 1/8 inch brass collet end for comfortably holding the small Swiss files. Move the file handle from file to file without tools.

Length: 4.25 inches or 11.0cm.

Learn More