Search results for: 'polish'
- Connoisseur Polishing Cloth
Starting at $6.60This is our favorite precious metal polishing cloth. Some polishing cloths leave noticeable scratches in the silver body of the instrument. This polishing cloth leaves only a very smooth finish. Each cloth has two different surfaces - one for initial polish, and one for finishing. Learn More
- Flute Body Mandrels
Starting at $47.50
Our Economy Flute Body Mandrel is made from precision ground tool steel. It is very hard to provide a long-lasting work-piece. The rounded end and rounded hip will help prevent damage. The workable space is 15”, or the entire length of a flute body, and 3” is allocated for securing in a vice and indicated by a line. Use the mandrel to check for straightness, burnishing, polishing, and dent removal. The threaded hole on the end will hold accessories, like a flute ragging attachment for easy polishing. Ships in blue protective sleeve.
Our Professional Flute Body Mandrel features the longest shaft length in the industry, with a full 18” working area. It's made from hardened precision ground tool steel. It features a rounded end tip and a threaded hole on the end to hold accessories, like the flute ragging attachment for easy polishing. Secure the mandrel in a vice with the hex stock end for the most reliable grip that gives you 6” to chuck without damaging any of the workable area. A delrin stopper will keep the flute body from going too deep and hitting the hex stock or vice. Use your Professional Flute Body Mandrel for checking straightness, dent work, polishing, and burnishing.
Mandrel Diameter is 0.735 inches (18.69mm) with as radius nose threaded for a 1/4-20 SAE fastener.Learn More
- Miniature Brushes
Starting at $1.16
- Stainless Flute Head Mandrel
Starting at $58.95
Pro Flute Head Mandrel We’re confident that our precision 100% stainless steel Flute Head Mandrels are the industry’s finest. Tapered to match the head joint, these mandrels can be used for checking straightness, burnishing, dent removal, and for holding while polishing or completing work on the head joint or lip plate. The long taper also allows the mandrel to fit inside the head joint even if there are some dents and damage. This model is fitted with a hexagonal delrin stopper to prevent the mandrel from being inserted too far and a stainless hexagonal handle that will keep the mandrel from rolling around on the tool bench and can be securely chucked in a vice. If you already have our flute body mandrel, you know the fine quality of this tool. All mandrels come with our protective blue mandrel guards. Economy Flute Head Mandrel This mandrel is the same as the professional model, only without the hexagonal handle and delrin stopper. Technicians can make their own handle or use with our dent rod.Learn More
- Flute Body Mandrel - Alto$180.00Out of stockWe developed the Alto Flute Body Mandrel by special request . Next time an alto flute comes into the shop, you'll be glad you have this custom mandrel for checking straightness, dent work, polishing, and burnishing on alto flutes.
.968" diameter mandrel with 20" working length - 26 1/8" total lengthLearn More
- Wenol$13.25Out of stockAfter searching and testing all metal polishing products available, we tested this excellent product on a suggestion from our good friend and fellow technician, Tom Sponik. Upon testing Wenol against other products we found it brought out a higher luster with a longer lasting shine. It is slightly more aggressive than Wright's silver polish and makes for a good quick polish if you need to shine up a bell or quickly take tarnish off an instrument. The convenient squeeze tube is more user friendly than liquid polishes and the polish will not run or drip onto pads. Wenol can be used on any bare metal surface. 100 ml / 3.98 oz Tube Learn More
- The Wilmington Tenor Saxophone
Starting at $2,895.00The Wilmington tenor’s gold lacquered body is accented with a nickel plated bell that gives it a unique look and enhanced resonance. Two necks are included both in gold lacquered finish and nickel plated finish. Your Wilmington Tenor will arrive to you, set-up, play-tested, and adjusted in house at the Sax ProShop. Learn More
- The Wilmington Alto
Starting at $1,335.00
An amazingly solid and well-made saxophone that is not unbelievably expensive. Don’t be fooled by the reasonable price of this outstanding saxophone, it is made thoughtfully and solidly and under the watchful eye of the Sax ProShop. The Wilmington Alto Sax is the first of our new line of outstanding imported instruments which will eventually include the entire family of saxophones, clarinets, and flutes.
Would you love to have your name engraved on your new Wilmington Alto? If so, enter the name you wish in the field below and Ryan, our in-house engraver will make this horn all yours!Learn More
- Flute Stabilizer$29.75
It is a real challenge to polish, or rag, a flute body on a mandrel because the flute slides and spins around. Our repair department created the Flute Stabilizer for use with our whole line of flute body mandrels to hold the flute in place to make it easy to polish and perform other tasks which require the flute to be stationary.
The Flute Stabilizer threads on to the end of the mandrel and can be left in place during most uses of the mandrel. Use the included hex key wrench to tighten the end, which expands a rubber gasket to make steady contact with the inside of the flute body, holding it in place. The gasket will only expand to a certain point, which eliminates the risk of over-expanding and causing damage to the flute.
For use with our Economy, Professional, and Alto Flute Body MandrelsLearn More
- Micromesh Roll
Starting at $87.00