SET A:
This set of 49 solid chrome steel balls is best for Smaller Tubing. Ball sizes range from 5/8-1 3/8" (16mm-35mm) Comes with Custom Oak Storage Box for easy size selection. For best results this ball set should be used with the 2.0" MDRS N50 tool.
4 Each of:
5/8" (15.87mm)
21/32 (16.66mm
11/16 (17.46mm)
23/32 (18.25mm)
3/4 (19.05mm)
3 Each of:
25/32 (19.84mm)
13/16 (20.63mm)
7/8 (22.22mm)
15/16 (23.81mm)
1" (25.40mm)
2 Each of:
17/16 (26.98mm)
1 1/16" (27.00mm)
1 1/8 (28.60mm)
1 3/16 (30.15mm)
1 1/4 (31.75mm)
1 5/16 (33.34mm)
1 3/8 (34.93mm)
SET B:
This set of 8 solid chrome steel balls is best used for dents on Baritone Saxes, Tubas, Baritones, and Euphonium. Ball Sizes Range from 1.5-2.375" (38.1mm-60.3mm)
1 Each of:
1.5" (38.10mm)
1.625 (41.28mm)
1.750 (44.45mm)
1.875 (47.64mm)
2.0 (50.80mm)
2.125 (53.98mm)
2.250 (57.15mm)
2.375 (60.32mm)
SET C:
This set of 3 solid chrome steel balls is used to remove large dents in Tuba bottom bows and branches. Size range 2.5-2.75" (63.5-69.85mm)
1 Each of:
2.5" (63.50mm)
2.625 (66.67mm)
2.75 (69.85mm
SET D:
This set of 5 hollow steel balls are used to remove shallow dents and to shape and burnish areas after heavy dent removal. Size Range 3.0-5.0" (76.2mm-127.0mm)
1 Each of:
3.0" (76.20mm)
3.5 (88.90mm)
4.0 (101.60mm)
4.5 (114.30mm)
5.0 (127.00mm)
Custom Oak Storage Box:
This sturdy oak box will hold both the B and C sets allowing for easy storage and size selection during dent removal. |
|
